完备ARRs集的生成方法及传感器优化配置应用
DOI:
作者:
作者单位:

军械工程学院光学与电子工程系,军械工程学院光学与电子工程系,军械工程学院光学与电子工程系,军械工程学院光学与电子工程系

作者简介:

通讯作者:

基金项目:

河北省重点基础研究项目


A method of generating complete ARRs set and application in sensor placement optimization
Author:
Affiliation:

Ordnance Engineering College,Ordnance Engineering College,Ordnance Engineering College,Ordnance Engineering College

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    解析冗余关系(ARRs)广泛应用于故障诊断和传感器优化、分析、证实,但缺乏系统、有效的方法来产生完备ARRs集,对此,提出了一种逐次消元法。该方法以系统元关系(PRs)为基础,通过若干次循环消元过程生成了完备ARRs集,同时生成了对应的假定特征矩阵(HSM);基于HSM,把传感器优化配置问题映射为一个特殊的0-1整数规划模型并用分支定界法求解该模型。应用表明该方法能在不降低故障检测率、隔离率的前提下减少了传感器数目,降低了测试代价,对故障诊断中的传感器配置问题有借鉴意义。

    Abstract:

    Analytical redundancy relations (ARRs) are used frequently in the arena of diagnosis as well as optimizing, analyzing, and validating of sensors of the system, but less attention has been paid to the development of systematic and efficient approaches for the generation of complete ARRs set. Hereto, an efficient method named successive elimination is presented. Based on the primary relations (PRs) of system, this method generates complete ARRs set as well as consequent hypothetical signature matrix (HSM) by several elimination loops. On the strength of HSM, the optimal sensor placement problem is mapped onto a special case of the 0-1 integer programming (IP) problem, which is solved by an algorithm of branch-and-bound in the end. Application results show that this method can decrease sensor number and testing cost without decreasing FDR and FIR and it’s beneficial to the sensor placement problem for fault diagnosis.

    参考文献
    相似文献
    引证文献
引用本文

杜敏杰,蔡金燕,刘利民,陈鹏.完备ARRs集的生成方法及传感器优化配置应用[J].数据采集与处理,2012,27(5):565-

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
历史
  • 收稿日期:2011-03-05
  • 最后修改日期:2012-01-20
  • 录用日期:2012-05-24
  • 在线发布日期: 2012-11-05